Verint Nextiva S1700e Series Podręcznik Użytkownika Pobierz pdf (Strona 52)

4: Setting Parameters with the CLI

36 Verint Video Solutions

Network

The Network menu allows you to configure several parameters to ensure the compatibility

between the S1100w and its IP network.

For more information about these settings, contact your network administrator.

DHCP Configuration

DHCP (dynamic host configuration protocol) allows devices and computers connected to a

network to automatically get a valid network configuration from a server. For more

information about DHCP, see Appendix C on page 49.

You can set this option only if the S1100w is connected to a network that uses a DHCP

server.

Local IP Address

The IP address is the identifier of the S1100w on the network. Its format is a 32-bit

numeric address written as four numbers separated by periods. Each number is in the

0–255 range. Each device on a network must have a unique IP address.

Subnet Mask

The subnet mask is the binary configuration specifying in which subnet the IP address of

the device belongs. A subnet is a portion of a network that shares a common address

component. On TCP/IP networks, a subnet is defined as a group of devices whose IP

addresses have the same prefix. Unless otherwise specified by your network administrator,

it is recommended to use a subnet mask of 255.255.255.0.

Gateway

The gateway represents a network point that acts as an entrance to another network.

Warning: Never use the IP address of the device as the gateway value.

Ping Request

Ping is a basic Internet program that allows you to check that a particular IP address exists

and can accept requests.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 110 111

Brak uwag

Verint Nextiva S1700e Series Podręcznik Użytkownika Strona 52