Verint Nextiva S1700e Series Podręcznik Użytkownika Strona 26
- Strona / 111
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
2: System and RF Planning
10 Verint Video Solutions
TPC
If the country of operation of the S1100w device requires conformity to the TPC (Transmit
Power Control) regulations, the transmission power of its radio is automatically reduced by
3 dB before leaving the Verint Video Solutions factory. However, in case of a weak wireless
link (that is, a link with an RF margin of less than 15 dB), you have the opportunity to use
the maximum transmission power (see page 39).
DFS
To follow the DFS (Dynamic Frequency Selection) regulations specified by ETSI for the
selected country, it is the master S3100 device that performs the tasks relative to
frequency channel selection and radar detection. In other words, you cannot choose the
frequency channel on which the edge device will run.
The automatic selection of the frequency channel limits the number and the configuration of
the wireless cells. Furthermore, when colocating many cells, all masters must “see” each
other.
Note: DFS is required only in the 5 GHz band.
You should start the master first, then power the client when the other device is in normal
operation.
The boot sequence of client (transmitter) devices is:
1. The device goes through the standard startup procedure.
2. The device roams through the channels in the available frequency bands to locate its
master.
3. When the master is located, the client device runs normally on the selected frequency
channel.
Colocated Cells
You can operate many wireless cells in the same location, provided you follow guidelines
relative to frequency channel, wireless passkey, and distance.
Regarding frequency channel, you cannot manually select one in the 5.40–5.725 GHz band
in Europe; for the detailed procedure, see page 12.
The wireless passkeys of colocated cells must be different from one another, regardless of
their frequency channels.
1
2
3
Unit initialization (3 seconds)
Roaming (2-25 seconds)
Normal operation
- Nextiva S1100w 1
- User Guide 3
- Verint Video Solutions iii 5
- Contents 7
- Verint Video Solutions vii 9
- Verint Video Solutions ix 11
- Who Should Read this Guide 12
- How to Use this Guide 12
- Related Nextiva Products 13
- About Us 13
- Warranty 14
- Verint Video Solutions xiii 15
- Overview 17
- About the S1100w 18
- Shipment 19
- Casing Description 20
- System and RF Planning 21
- Frequency Bands and Channels 22
- Wireless Cells 23
- System Planning 23
- Compatibility Issues 24
- S3100 3 S3100 2 25
- S1100w 2 25
- S1100w 1 25
- Colocated Cells 26
- Distance Limitations 27
- 5 GHz Band in Europe 28
- S3100 S3100 29
- RF Planning 30
- Antenna Requirements 31
- Interference 32
- RF Exposure Considerations 32
- Configuring and 33
- Installing the Device 33
- Serial Port 34
- Computer Requirements 35
- Setting Parameters 35
- Point-to-Point Connection 36
- Verint Video Solutions 21 37
- Installing the Transmitter 38
- Installing an Antenna 38
- RS-422/485 39
- Configuring the I/Os 41
- Updating the Firmware 43
- Performing a Hardware Reset 43
- Red/Blue Display 44
- Quality of Service 44
- Status LED 44
- Verint Video Solutions 29 45
- 30 Verint Video Solutions 46
- Setting Parameters with 47
- Getting Started 48
- Access Management 50
- User Accounts 51
- Security 51
- Network 52
- Wireless Communication 53
- Advanced Parameters 54
- Key Entry Format 55
- Tx Power Scale 55
- Sensitivity Threshold 55
- Minimum Margin 55
- Indoor/Outdoor RF Regulation 55
- System Status 56
- Advanced 56
- Load Default Configuration 57
- Reboot System 57
- 42 Verint Video Solutions 58
- Factory Default 59
- Configuration 59
- Cable Connections 61
- B: Cable Connections 62
- 46 Verint Video Solutions 62
- Here is its pinout: 64
- DHCP Support and 65
- C: DHCP Support and APIPA 66
- 50 Verint Video Solutions 66
- DTE and DCE 67
- Connections 67
- Verint Video Solutions 53 69
- 54 Verint Video Solutions 70
- CLI with Telnet 71
- E: CLI with Telnet 72
- 56 Verint Video Solutions 72
- Verint Video Solutions 57 73
- 58 Verint Video Solutions 74
- Surge Protection 75
- F: Surge Protection 76
- 60 Verint Video Solutions 76
- Channels 77
- Separation Between 77
- Devices Using Adjacent 77
- Verint Video Solutions 63 79
- 64 Verint Video Solutions 80
- 13 feet (4m): 81
- 13 feet (4m) 81
- 3.3 feet (1m) each 81
- 66 Verint Video Solutions 82
- Motion Track 83
- Motion Detection Processing 84
- Physical Connections 84
- Establishing a Connection 85
- H: Motion Track 86
- 70 Verint Video Solutions 86
- Configuring the DVMD Module 87
- Status Information 88
- Files Settings 89
- Display Settings 90
- Verint Video Solutions 75 91
- Sensitivity Settings 92
- Target Settings 93
- Target Size 94
- Technical Specifications 95
- 82 Verint Video Solutions 98
- Verint Video Solutions 83 99
- Glossary 100
- 84 Verint Video Solutions 100
- Verint Video Solutions 85 101
- Nextiva S1100w User Guide 101
- 86 Verint Video Solutions 102
- Numerics 103
- Compliance 107
- 92 Verint Video Solutions 108
- Declaration of Conformity 109
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Verint Nextiva S1700e Series
(74 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji