Verint Nextiva S1700e Series Instrukcja Użytkownika Pobierz pdf (Strona 43)

SConfigurator User Manual

Verint Video Solutions 31

 WEP—The indication of whether WEP encryption is

activated. If encryption is disabled, the system will still

offer some level of protection through the unique SSID.

To change the wireless settings for an S1000w device:

1. In the parameter tree, expand the Network structure,

then click Wireless.

2. In the Channel, Bit Rate, and SSID fields, change the

desired settings as required.

3. To change the WEP key:

a. Click Change WEP Key.

The WEP Key window appears.

b. Select the WEP key mode.

c. In the WEP Key field, enter the new key.

d. In the Confirmation field, re-enter the key.

e. Click OK.

4. To activate the WEP key, select Active in the WEP list.

5. Click OK.

Network\Wireless\Link Status

The Network\Wireless\Link Status pane contains information on

the devices (client or slave) connected to a master S3100:

 IP Address—The IP address of the device.

 Unit Name—The name of the device.

 Unit Rx Bit Rate—The reception data rate (in Mbps) of the

client or slave. It corresponds to the transmission bit rate of

the master.

 Unit Rx Level—The average signal level (in dBm) indicating

the strength of the signal received by the client or slave.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 98 99

Brak uwag

Verint Nextiva S1700e Series Instrukcja Użytkownika Strona 43