Verint Nextiva S1700e Series Instrukcja Użytkownika Pobierz pdf (Strona 16)

1: Getting Started

4 Verint Video Solutions

IP Network

The following SConfigurator settings are mainly used to

discover Nextiva devices on the IP network; for more

information about the discovery process, see page 10. The

settings are:

 IP Address of the PC—The unique IP address of the

computer where SConfigurator runs. You do not normally

have to change this value, since SConfigurator

automatically detects it. However, you can change the

displayed value if:

 You are using two Ethernet cards on your PC.

 You are using a virtual private network (VPN).

 The IP address of the computer has changed.

 Detect All Units on LAN—The indication of whether all

devices connected to the same LAN as the PC and having

the same VSIP port as SConfigurator will be discovered,

even those whose IP addresses are not part of the same

subnet as the computer.

Note: This setting works only with the broadcast detection

method. If you select it, SConfigurator automatically

switches to broadcast, even if the Discovery IP

Address field displays the multicast address.

You typically activate this setting to discover the new

devices on the network and those in APIPA mode (for more

information about APIPA, see page 71). When it is

activated, device discovery will take more time.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 98 99

Brak uwag

Verint Nextiva S1700e Series Instrukcja Użytkownika Strona 16