Verint Nextiva S1700e Series Instrukcja Użytkownika Pobierz pdf (Strona 36)

2: Setting Up the Edge Devices

24 Verint Video Solutions

 Channel—The frequency channel, within the selected band,

that the wireless system will use.

 Master S3100—If your devices are operating in a DFS

environment, you cannot manually select the frequency

channel; in this context, the displayed value of the

Channel parameter is Auto.

On a master bridge in a non-DFS environment, you can

choose the RF channel that will be used by the wireless

cell or the automatic channel selection.

The channels available in North America are:

 1 to 11 in the 2.4 GHz band

 52, 56, 60, and 64 in the 5.3 GHz band

 149, 153, 157, 161, and 165 in the 5.8 GHz band

To know which channels are available elsewhere, refer

to the Wireless Frequency Plan document located on

our web site (Tools & Demos section).

 S1100, S1100w, and slave S3100—Even though the

channel is assigned by the connected master S3100,

you can specify an initial value for the roaming process

by which the device will find its bridge. However, this

initial channel may not be the one used by the bridge.

 Bit Rate—The transmission data rate at which the device

operates. This parameter is available on S1100, S1100w,

and S3100 slave devices.

Possible values are:

 Auto—The best possible value (with a default RF margin

of 15 dB) automatically assigned when the device

connects to its wireless bridge. To change the margin,

see page 26.

 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.

Once the device is operating properly, Verint Video

Solutions strongly recommends to change the configured

bit rate from Auto to the actual bit rate of the connection

(for the procedure, see page 32).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 98 99

Brak uwag

Verint Nextiva S1700e Series Instrukcja Użytkownika Strona 36