Verint NEXTIVA S2800E series Podręcznik Użytkownika Pobierz pdf (Strona 17)

Nextiva S2800e Series Programming Guide Programming the S2800e Camera • 11

The Sector Censoring screen (on all camera models except the 22X)

is designed to disable the video in areas that do not require

surveillance. It is often used to keep traffic control cameras from looking

into the windows of adjacent apartment buildings, but this feature has

many other applications. Sector censoring goes one step further,

allowing the user to turn off the video for any or all of the 16 sectors. A

black screen with the words “Blank Sector” is displayed until the

camera moves out of that sector and into one where the video is

enabled. This function includes a tilt mask, where the top and bottom of

the mask is programmable for each pan sector. Only when the tilt

position is within the programmed mask will the video be disabled. The

default mask covers the entire area (full tilt up and down). The censored

sectors are programmed as follows:

1. In Nextiva Review, adjust the camera angle so that the area to be

masked is in the center of the screen.

2. From the menu, select Camera Controller > Sector Censoring.

3. Select the desired sector.

4. Tilt down (by pressing the down arrow key) to the bottom of the

area to be masked. Press Enter to set.

5. Pan right to the end of the sector, then press Enter to define.

6. In the Sector Censoring menu, enable or disable the masked

sector.

7. Repeat steps 1 to 6 for each desired sector.

Sector censoring offers sixteen privacy masks that block out selected

areas of a scene. The size and position of the block are adjustable

using the joystick and Enter key. The privacy mask provides a zoom

level feature that is set in the System Settings menu; for more

information, see page 6.

Note: Frame positioning and text size affect the privacy mask; for more

information, see page 17.

1. Select the desired sector (privacy mask).

2. Select the Pmask Number.

3. Using the joystick and the Enter key, define three corners of a

block.

When complete, the Configure Pmask screen displays to program

the next privacy mask.

4. When you exit the menu system, the privacy masks appear. The

privacy mask is zoom scalable. The default setting for video in all

sectors is Enabled, which permits video surveillance in all

16 sectors.

5. In the System Settings menu, select the Privacy Mask Zoom

Level. Select Pmask number and program the Zoom Level. The

default zoom level is 1.0X, which means it will always display.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Komentarze do niniejszej Instrukcji

Brak uwag

Verint NEXTIVA S2800E series Podręcznik Użytkownika Strona 17

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kamery ochrony Verint NEXTIVA S2800E series